WAN Interface
(ADSL2+): RJ11
LAN Interface
4 x RJ45 10/100 Base-T Ethernet ports (auto MDI/MDI-X)
WIRELESS Interface
1 X 2.2 dBi external orientable R-SMA Antenna
LED
7 diagnostic LEDs
Button
Reset, WPS and Power/WLAN Switch
Chipset
Ralink® 3050 (Wireless)
TrendChip® TC3162LE (ADSL2+)
ADSL
• Full Rate ANSI T1.413 issue 2
• ITU G.992.1 (G.dmt), ITU G.992.2 (G.lite), ITU G.994.1 (G.hs)
ADSL2
• ITU G.992.3 (G.dmt.bis) [12Mbps download, 1 Mbps upload]
• ITU G.992.3 Annex M
ADSL2+
• ITU G.992.5 (G.dmt.bisplus) [24Mbps download, 1 Mbps upload]
• ITU G.992.5 Annex M
ATM
ATM Adaptation Layer Type 5(AAL5) and ATM service class: CBR, UBR, VBR-rt, VBR,
ATM Forum UNI 3.0, 3.1 and 4.0
Wireless
• Standard IEEE802.11g/n and IEEE802.11b
• DSSS (Direct Sequence Spread Spectrum)
• Modulation: QPSK / BPSK / CCK and OFDM
• RF Frequency: 2.400 GHz ~2.472GHz
• Media Access Protocol: CSMA/CA with ACK
• Operating Channel: 13 (Europe)
• Data Rate (with automatic adaptation): 802.11n (Up to 150Mbps) with Automatic Fall-Back
• Transmitting Power: 802.11g/n: up to 16 ± 1 dBm
• Coverage Area: [Outdoor <100m / Indoor <35m]
• 1 X 2.2 dBi external RSMA Antenna
• Wi-Fi Protected Access (WPA-PSK, WPA2-PSK) and WEP 64/128 bit
• WPSTM
WDS
Up to 4 devices (WEP mode)
Receiver Sensitivity
• 802.11b (1Mbps): -90dBm @8% PER
• 802.11b (6Mbps): -88dBm @8% PER
• 802.11b (11Mbps): -85dBm @8% PER
• 802.11g (54Mbps): -68dBm @10% PER
• 802.11n (150Mbps): -68dBm @10% PER
Protocols
• RIP1, RIP2, STATIC ROUTING,IP, ICMP, TCP, UDP, IGMP
• Payload encapsulation: RFC 2364 (PPPoA), RFC 2516 (PPPoE) and RFC 1483 Routed and Bridge
Management
• Easy Web GUI (also remote), Telnet (also remote)
• Firmware upgrade from local (Web, Telnet)
• SNMP MIB support
• Wizard Configuration Assistant (WEB)
Firewall and Security
• NAT, PAP, CHAP
• SOHO Firewall Security with NAT Technology and Packet Filtering
• SPI, URL and Application Filter
• Password protection for system management
• VPN (IPSec, PPTP) pass through
Support Internet Application
• Web, FTP, ICQ, Telnet, E-Mail, News, Netmeeting, MS messanger, PCanywhere, mIRC, CuSeeme...
Advanced Characteristics
• Wizard Setup
• UPnP, Virtual Server (with PAT) and DMZ
• Dynamic DNS
• DNS, DNS relay and IGMP proxy
• DHCP server (with Fixed Host), DHCP client, SNTP
• Email Alert, SNMP V1.V2c, Wake on LAN, SysLog Server
Power Consumption:
9V ± 5%, 2A
Supported OS (USB Wireless Adapter)
• MS Windows® VISTA (32/64-bit)
• MS Windows® XP (32/64-bit)
• MS Windows® 2000 (SP4 required)
• MS Windows® 7 (32/64-bit)
• Linux Kernel 2.6.29
• Mac OS X 10.3/10.4/10.5/10.6.
Certifications
CE (Europe), WHQL Certification for driver
Dimensions (mm)
• (NetFly UP2 WN) 38 x 16 x 6 (without USB)
• (WebShare 142WN) 155mm x 110mm x 24mm
Temperature Range
• Operation: 0°C ~ 32°C
• Storage: -10°C ~ 60°C
Humidity
10% ~ 75% (non Condensing)
Weight
225g (without AC Adapter)
System Requirements (USB Client)
• PC with available USB V2.0/1.1 slot
• Intel® Pentium®III 600Mhz or compatible processor with 512MB RAM
• Windows® 2000/XP/Vista/7, Mac OS X or Linux operating system
• Minimum 45 Mbytes free disk space for installing the driver and utilities
• CD-Rom drive
System Requirements (Router)
• TCP/IP protocol must be installed on each PC
• Web browser, such as Microsoft Internet Explorer 5.0 or later, Netscape Navigator 6.0 or later
Package Contents
• WebShare 142WN Wireless N ADSL2+ Router
• NetFly UP2 WN Wireless USB Adapter
• RJ11 ADSL/telephone cable, CAT5 LAN cable and 2 dBi Antenna
• Power Adapter (AC-DC, 9V/2A)
• Quick Start Guide (English, French and Italian)
• CD-Rom with Utility, Driver and Manual (English and Italian)
• 1 x Warranty Card and 1 x WEEE Card
** When plug the device in the USB 1.1/1.0 port, the real throughput will be up to 6Mbps only when running 11Mbps or higher speed